Rainscreen Brackets Key to Reducing Building Thermal Loss - rainscreen brackets
A typical rainscreen façade contains hundreds to thousands of brackets, impacting thermal performance.

When discussing the thermal performance of a building envelope, the focus naturally falls on insulation thickness, glazing specifications, and airtightness strategies. Yet, there is another element within the façade build-up that can significantly influence overall performance: the rainscreen bracket.

A typical rainscreen façade can contain hundreds, sometimes thousands, of brackets. Individually, each one may seem insignificant, but collectively, they can noticeably impact a wall’s thermal performance and determine whether a project achieves its target U-value.

Understanding Thermal Point Loss

U-values remain the primary benchmark for measuring thermal performance, yet they only tell part of the story. Wherever a rainscreen bracket penetrates insulation to connect the façade system back to the structure, there is potential for heat transfer, known as thermal point loss.

The contribution of each bracket is measured through its point thermal transmittance, commonly referred to as an χ value. These values are incorporated into the corrected U-value calculation for the external wall. Material selection is critical here. Aluminium brackets offer strength, durability, and versatility but can contribute to thermal bridging due to their high conductivity.

Stainless steel brackets, however, have lower thermal conductivity, reducing thermal point losses while providing excellent corrosion resistance without needing an isolator between the bracket and substrate.

A Joined-Up Approach to Bracket Specification

At SFS UK, the NVELOPE® Thermal Solutions range provides designers with aluminium and stainless-steel bracket options alongside the patented NVELOPE® Thermal Pad. This approach supports an integrated view of façade design, rather than treating thermal performance as a separate consideration.

The NVELOPE® Thermal Pad, supplied pre-fitted to the bracket, has a thermal conductivity of 0.020 W/mK. As a non-compressible thermal break, it maintains performance during installation, minimizing the difference between calculated and installed performance when correctly specified and fitted.

For projects prioritizing reduced thermal point loss, the NVELOPE® NVS + Thermal solution combines stainless steel brackets with the non-compressible thermal pad, supporting lower calculated external wall U-values. Aluminium options, including the VB + Thermal and HB + Thermal systems, use the same thermal pad technology to minimize heat loss while offering aluminium’s advantages.

Addressing thermal point loss early in design is vital. Through the SFS Project Builder platform, project teams submit key design information and receive supporting data, including static load calculations, NBS specifications, and thermal performance details.

This approach helps designers accurately understand how bracket selection influences thermal performance and identifies opportunities to optimize insulation thicknesses, potentially reducing costs. The χ values are calculated for the project’s specific wall build-up using three-dimensional modeling, avoiding generic assumptions or standard correction factors.

Peter Clarke, National Sales Manager at SFS UK, emphasizes that bracket selection should occur during the design stage, not when finalizing the subframe specification. This ensures the target U-value is met and supports overall energy efficiency.

Beyond Thermal Performance: Fire Safety and Sustainability

In addition to thermal considerations, the reaction-to-fire performance of rainscreen brackets is critical for building safety. SFS UK’s aluminium and stainless-steel brackets are classified A1 to BS EN 13501-1, ensuring high fire resistance.

The NVELOPE® Thermal Pad achieves an A2-s1,d0 classification. However, fire resistance requirements must be assessed as part of the complete tested system and verified through appropriate technical channels.

Obtaining accurate thermal data early in design is essential. SFS UK’s Project Builder platform, part of the ConnectSuite® digital ecosystem, allows project teams to submit design details such as substrate type, building height, façade loads, cladding zone requirements, and bracket preferences.

These calculations support the design team but do not replace their responsibilities. Outputs should be independently reviewed and verified by qualified professionals.

The VB + Thermal brackets, made from aluminium with 60% average recycled content, demonstrate SFS UK’s sustainability commitment, supporting broader environmental goals in construction. For more information on SFS UK’s NVELOPE® Thermal Solutions and Project Builder platform, visit their website or contact them directly.